Operating instructions
ScanAfia X TK, S, ICU Version 1.5
Copyright © Lojer Oy, 2015
24
6.7 Adjusting the thigh and leg rest
In ScanAfia X TK-480 /490, S-480 / 490 and ICU models, the thigh and leg rests
are adjusted electrically.
IMPORTANT!
Make sure that nothing and nobody is between the leg rest
and upper frame when you are adjusting (danger of crushing).
Adjust the thigh rest to the desired angle by pushing the appropriate button on
the hand-held control. In the final stage of adjustment, the leg rest is horizontal.
In the lowering operation, the leg rest and thigh rest adjust in the reverse order.
Figure 49.
Raising the thigh and leg rest
Figure 50.
Raising the thigh and leg rest
6.8 Trendelenburg adjustment
The S models of the hospital bed have a Trendelenburg adjustment operated
with a gas spring as standard equipment. The bed tilts in Trendelenburg (12°)
or reverse Trendelenburg (20°) positions when you pull the handle at the foot
of the bed (see Figure 52). When the bed is in the desired angle, release the
handle and the bed will remain in the desired position.
Figure 51.
Warning label for Trendelenburg adjustment (S models)
Figure 52.
Trendelenburg adjustment (S models)
Trendelenburg
levers
