Lojer SALLI F1, Руководство по эксплуатации, Страница: 16 / 37

Operation instructions for Salli F1, F2, F3, H2 and H4 Hospital bed / Version 1.3
Copyright © Lojer Oy, 2015 13
5.7.3 Eco model side rails (1332KSKP, 70524KP)
There are two different models of eco rails available for Salli beds. Both
functions and are assembled same way, only difference is in dimensional
structure which allows 70524KP type to use thicker mattresses.
Installing of eco rails starts to attachment of front support underneath upper
frame. Raise backrest up position. Install front support so that it will line with
holes in upper frame and fix it with bolts. Notice white cap heading head end
of bed. Standard front system has bolt and nut fixing and it requires tools for
attachment. Quick release system is supplied with wingnuts and support plate
which can be attached by hands.
Figure 11. Attachment of front support, quick release system
If foot bed end is not in place, put it into place but do not tighten it yet. Notice
extra parts in bed end for eco rails attachment pointing inward bed. Side rail
lock will be located into foot end of the bed. Slide rail into front support, notice
that plastic bearing for side rail is in place. Raise bed end in foot end a little bit
and slip rail into place and lower bed end into hole. Repeat on other side and
tighten bed end attachment. Check locking function of side rail.
Figure 12. Eco model rail assembly, head and foot end of bed
Recommended mattress height for 1332KSKP is maximum 13 cm and for
70524KP maximum 18 cm.
Align support along holes pattern, nut or support plate
inside frame side
Side rail lock knob
Plastic bearing, both ends of bed