Lojer SALLI F1, Руководство по эксплуатации

Страница: 15 / 37

Operation instructions for Salli F1, F2, F3, H2 and H4 Hospital bed / Version 1.3
Copyright © Lojer Oy, 2015 12
5.7.2 Raised side rails ( 1332SKKPKOR )
Raised side rail functions are like side rail (1332SKKP). Install, detaching and
adjustment are similar as in 1332SKKP model. Raised side rail has a top part
with two positions to add patient safety when using air mattresses or thick
comfort mattresses.
Adjust the top part of the side rail by pulling locking knobs and turn it at the
same time. When the top part of the side rail is nearby of its available position
release locking knobs. Ensure the locking by moving the top part of the rails.
It will lock to the desired position when you hear a click from locking knob.
Recommended mattress height with raised model side rail is max. 22cm.
Figure 10. Locking knobs for rail part adjustment
IMPORTANT! Ensure that there is nobody or anything between the rails
when they are being adjusted. Ensure that you hear a click,
that the rail is locked in the upper position.
IMPORTANT! When a patient is being transported, lower the adjustments
of the sleeping platform and the bed to the lowest positions
and lift the rails up to minimise a patient’s risk of falling.
IMPORTANT! Always use mattress size which has been defined by
manufacturer for combination of side rail / bed model.
IMPORTANT! A bed rail, which is in the middle or intermediate position will
not prevent a patient’s fall from the bed. Consequently, if a
rail is in the middle position, it does not meet the
requirements of standard IEC 60601-2-52 and the patient
safety is endangered.