UTRID-16 Quickstart Guide
Page 2 of 3
After configuration with LogTag
®
Analyzer for push button start the word READY is shown,
together with the current time in 24 hour format.
Press the START/Mark button until READY disappears and REC starts flashing.
Release START when REC stops flashing.
REC will be displayed to confirm the logger is recording.
The UTRID-16 now records temperature data. This start option works the same as in
LogTag
®
LED products. If the logger was configured for push button start with a start delay
(regardless of quickstart settings), the word DELAY is shown instead of the symbol.
During normal operation the display shows the most recently recorded temperature. The
current time is also displayed in 24 hour format. A tick symbol is shown as long as no
alarm event has occured.
When you press the START/Mark button while the UTRID-16 is recording temperature,
an inspection mark is recorded against the next temperature reading. The MARK symbol
appears and remains shown until the next reading is taken.
What happens when you plug your LogTag
®
into a USB port depends on the operating
system of the computer, the settings made during configuration and whether or not
LogTag
®
Analyzer is running.
If the LogTag
®
was configured to generated files, a new drive or mounted device will
appear. The device name will be created from the serial number of the logger. You can
access the files by browsing to the newly created drive and double-clicking the PDF, CSV
or LTD files. For PDF files you need Adobe Acrobat Reader or a similar PDF viewer.
To open the LTD file you need to install the free LogTag
®
Analyzer software. CSV files can
be opened with a text editor, or imported into a spreadsheet program such as Microsoft
Excel
TM
.
You can unplug the logger at any time; there is no need to stop the device.
3. START / INSPECT
4. DOWNLOAD / RESULTS
DATA EVALUATION - REPORT
