Preparing a UTREL30-WiFi for first use
UTREL30-WiFi User Guide
26
l
The alarm parameters for the second channel can be entered on the next tab.
Figure 5:
Sample Alarm Configuration Settings for channel 2
Once an alarm has triggered, the alarm indicator ( ) remains shown until the alarm is
cleared (see
) or the unit is reconfigured. The day alarm
marker remains shown until midnight, then it turns off and the marker for the previous
day is shown (
) to indicate the alarm was registered against what is now the previous
day. When midnight passes next, this marker will move to and so on.
Alarm Re-triggering
A note on alarm re-triggering:
As soon as an alarm is triggered, the
corresponding delay time (but not any others) resets to zero and alarm
processing starts again. The alarm processing for all other alarm delays is not
affected. Therefore, accumulative or consecutive alarms will re-trigger, if the
alarm conditions are met again, and the Alarm Indicator ( ) and the Day Alarm
Marker () will be shown, even if any previous alarm was cleared.
Clearing an
Alarm does not reset any of the delay values.
