Logosol SMART SET Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 16

Logosol SMART SET Скачать руководство пользователя страница 2

LOGOSOL continuously develops its products.

For this reason, we must reserve the right to modify

the configuration and design of our products.

Document: Smart Set User Manual

Ref. No. User Manual, English: 0458-395-5352

Text: Martin Söderberg

Illustration: Martin Söderberg

Last revised: January 2019

© 2018 LOGOSOL, Härnösand Sweden

THANK YOU FOR CHOOSING A LOGOSOL MACHINE!

Read through the user manual carefully
and make sure you understand its
contents before you use the equipment.
This user manual contains important
safety instructions.

WARNING!

Incorrect use can result in

serious or fatal injuries to the operator
or others.

W

e are very pleased that you have demonstrated your confidence in us by purchasing this

product, and we will do our utmost to meet your expectations.

Logosol has been manufacturing sawmills since 1989. In that time we have supplied
approximately 50,000 machines to satisfied customers the world over.

We care about your safety as well as we want you to achieve the best possible results with
your equipment. We therefore recommend that you take the time to carefully read this user
manual from cover to cover in peace and quiet before you begin using the product.

We hope you get a lot of satisfaction from the use of your new equipment.

Bengt-Olov Byström

Founder and chairman,
Logosol in Härnösand, Sweden

«
1
2
3
4
...
»

Содержание SMART SET

















Отзывы:

Нет отзывов