Quick Start Guide
13
C
HAPTER
1 Setting Up the LogLogic Appliance
10.
Verify that the current running network settings are correct:
> show
11.
(Highly recommended) Set up an NTP server, using the IP address or DNS name of the
NTP server:
set ntpserver time.nist.gov
12.
Either reboot or halt the Appliance.
To reboot the Appliance type
system reboot
.
To halt the Appliance type
system halt
and wait for approximately 2 minutes for
the Appliance to cease operation before removing power.
CAUTION:
When powering down the appliance it is important to follow a proper shutdown
procedure. Failure to comply could cause a corrupted file system, loss of data or a failure to
boot the Appliance.
All manuals and user guides at all-guides.com