logitrans EHS 1000RF-SEMI, Руководство пользователя

Страница: 5 / 16

5
3.1 Avoid overloads
The maximum load must not be exceeded.
Remember , the stacker is designed for evenly distributed load, - goods on pallets
etc. If the forks are pointloaded on one side there is a risk of bending.
3.2 Avoid offset loads
The load must be evenly distributed. The maximum centre of gravity distance from
the front of the fork mast (given on the truck) must not be exceeded. A greater
distance will reduce the level of safety and increase the risk of toppling.
Goods on pallets, etc. must be properly secured so that they cannot fall off during
transport, when the truck is lifted, or when the truck must remain lifted for a time.
3.3 Marking
The mast lifting capacity and the corresponding centre of
gravity distance are given by the pictogram on the side of
the mast.
The lifting capacity of the mast is the same as the
max. lifting capacity of the product.
Max. lifting capacity is set on the safety valve in
the product.
3.0 Optimum safety