English
3
For a Macintosh
®
Installation
1. Turn on the computer, then perform a HotSync
®
operation to back up the data on your handheld.
(Refer to your Palm
™
handheld documentation.)
2. Insert the Logitech
®
TypeAway
™
software CD into the computer’s CD ROM drive.
Open the CD by double-clicking its icon
located on the desktop.
3. Open the “Macintosh” folder, then the “TypeAway Keyboard” folder.
Double-click “TypeAway.prc” to install that program.
4. Follow the on-screen instructions to finish software installation.
5. Perform another HotSync
®
operation to transfer the keyboard software application to your handheld.
(Refer to the documentation that came with your Palm
™
handheld for more information about performing a HotSync
®
operation.)
6. Reset the Palm
™
handheld by tapping the Reset button on the screen.
7. After resetting the Palm
™
handheld, disable other keyboard drivers.
If you use other serial port devices on your Palm
™
handheld, you must disable those drivers as well.
8. On the Palm
™
handheld, tap the Logitech
®
icon to launch the driver software.
9. Turn off the Palm
™
handheld and connect it to the Logitech
®
TypeAway™ keyboard, as described in the section
“Setting Up the Keyboard.”
