If you see this message, you'll need to approve the loading of the KEXT manually so that your
device drivers can be loaded and you can continue to use its functionality with our software. To
allow KEXT loading, please open
System Preferences
and navigate to the
Security & Privacy
section. On the
General
tab, you should see a message and an
Allow
button, as shown below. In
order to load the drivers, click
Allow
. You may need to reboot your system so the drivers are
properly loaded and the functionality of your mouse is restored.
NOTE:
As set by the system, the
Allow
button is only available for 30 minutes. If it has been
longer than that since you installed LCC or Logitech Options, please restart your system to see
the
Allow
button under the Security & Privacy section of System Preferences.
NOTE:
If you don’t allow KEXT loading, all devices supported by LCC will not be detected by
software. For Logitech Options, you need to perform this operation if you're using following
devices:
T651 Rechargeable trackpad
Solar Keyboard K760
K811 Bluetooth keyboard
T630/T631 Touch mouse
Bluetooth Mouse M557/M558
Close
