16
Selecting devices for each of your Activities
When you set up Activities, the software asks questions about the function of each device.
For example, if you set up the Watch TV Activity, you’re asked which device changes the channels
(TV or satellite/cable box). If you only have one device that is capable of doing something, then
the software skips the question. For example, if you only have one TV, the software doesn’t ask you
which device displays video.
If the device has more than one input, the software asks you which input the device needs to be set.
If you’re not sure which input a device uses, see
Figuring out which type of input control you have
for more information.
Adding an Activity
To set up your Activities, you need to enter the information related to the Activities you will be using
on your Harmony 900. The Harmony Remote Software shows you a selection of recommended
Activities based on the device information you provided.
During the initial set up, you will be walked through the steps to set up your Activities.
To add later, In your Harmony Remote Software account, select the
Activities
tab.
To add an Activity, click
•
Add Activity
.
To remove an Activity, click the
•
icon for the Activity you want to remove.
To modify the settings for an Activity, press the
•
Settings
button for the Activity you want
to modify.
Universal Electronics Exhibit 2036, Page 16
Universal Remote Control v. Universal Electronics, Trial No. IPR2014-01106
