The Audio Tuning Wizard
The first time that you start your Logitech®
Cordless Headset software, it guides you through
the Mircrophone/Speaker Setup Utility and Audio
Tuning Wizard that lets you do the following:
• Select the audio input device (microphone)
and audio output device (speakers).
• Specify microphone input volume and
speaker output volume.
• Test audio settings.
Tip:
To modify these settings later, start your
Cordless Headset software, click the
Settings
Button, and then click the
Audio
tab.
Start Using Your Cordless Headset
Your cordless headset is now set up and ready to provide you with seamless audio in your internet calls. Just
open a supported PC calling application, and then begin placing calls. See packaging for a list of supported
applications.
Modify Your Cordless Headset Settings
To modify your cordless headset settings:
1. Start the
CallCentral
™
software by doing either of the following:
• On your desktop, double-click the
CallCentral
™
icon.
OR
• In the lower-right corner of your desktop in the taskbar, click the
Cordless Headset
icon.
2. Click the
Settings
Button.
3. Click the
Audio
tab.
4. Modify as desired.
Tu
rn
in
g
O
ff
Y
ou
r H
ea
d
se
t
PC
S
of
tw
ar
e
Turning Off Your Headset
Press the Multi-Function Button (MFB) continuously on the headset for more than 3 seconds.
Here is a complete chart showing all of the PC functions:
How to
What you do
What you see
What you hear
Turning on headset
Press MFB on headset for 2 seconds
5 Blue LED flashes, then slow Blue
LED flashes
Brief low-to-high tone
Connecting to USB Receiver
Turn on headset, plug in USB Receiver
to USB port, wait 20 seconds
3 repeating Blue flashes on headset;
2 repeating Blue flashes on dongle
No tone
Notification Incoming Call
No action
3 Repeating Blue flashes on headset;
Alternating red/blue flashes on dongle
Melody on headset
Answering Call on headset
Press MFB on headset briefly
4 Repeating Blue Flashes on headset;
Solid Blue LED on dongle
Single beep when answered
Answering Call on PC
Click on-screen button with mouse to
answer call
4 Repeating Blue Flashes on headset;
Solid Blue LED on dongle
Normal call audio
Call in Progress Notification
No action
4 Repeating Blue Flashes on headset;
Solid Blue LED on dongle
No beeps
Ending Call from headset
Press MFB on headset briefly
3 repeating Blue flashes on headset;
2 repeating Blue flashes on dongle
Single beep
Ending Call on PC
Click on-screen button with mouse
to end call
3 repeating Blue flashes on headset;
2 repeating Blue flashes on dongle
Single beep
MIC Mute-On
Press and hold Vol(+) and Vol(-)
buttons simultaneously for 3 seconds
4 Repeating Blue Flashes on headset;
Solid Blue LED on dongle
Beep every 30 seconds
Ending MIC Mute
Press and hold Vol(+) and Vol(-)
buttons simultaneously for 3 seconds
4 Repeating Blue Flashes on headset;
Solid Blue LED on dongle
Single beep
Placing Outgoing call
from PC
Click on button on PC with mouse to
place outgoing call
4 Repeating Blue Flashes on headset;
Solid Blue LED on dongle
Normal call audio
Incoming Call Reject
Press MFB for 3 seconds
4 Repeating Blue Flashes on headset;
2 repeating Blue flashes on dongle
Double beep
Low Battery Notification
No action
Repeating Red flashes on headset
Beep every 30 seconds
Standby or Connected
Notification
No action
3 repeating Blue flashes on headset;
2 repeating Blue flashes on dongle
No Audio
Turning Off headset
Press MFB for 2 seconds
5 Red LED flashes on headset; Slow
repeating single Blue flash on dongle
High to low tone
Charging headset
Plug AC adapter into headset then into
electrical outlet
Continuous Red LED
No beeps
Disconnect from PC
Press dongle button once, short press,
<1 second
Blue blink on headset; 1 repeating
Blue blink on dongle
No beeps
Reconnect to PC
Disconnect from phone, press button
on dongle, short press
3 repeating Blue flashes on headset;
2 repeating Blue flashes on dongle
No tone
