INSTALLATION GUIDE
(800) 665-3760
4
|
3. Full-extension slide attache baskets and shelves to our frames. Attach the stand slides (
PART
2
) to the frame in pairs, one
level at a time starting with your lowest desired level. To attache a slide, hold the side at an angle and insert the top tab (Fig. 7).
Rotate the slide and insert the bottom tab (Fig. 8). the slide will then slightly drop down.
4. Set the wire shelf or wire baskets on the slides using the hooks on the slides (Fig. 9)
5. To attach plastic tubs to slides use the slide frame. Place the frame on the slide just like the wire baskets and shelves
(Fig. 10). Make sure you have the frame in the right position; the smaller frame brace is facing forwarded.
6. Place the tub inside of the slide frame (Fig. 11)
7. A slanted slide has swiveling bracket tabs (Fig. 12) to allow the front and
back of the slide to be placed at different levels. To attach the slanted
slide one level at a time starting at your lowest desired level. To attach
a slanted slide hold the slide at an angle and insert the top tab (Fig. 13).
Rotate the slanted slide and insert the bottom tab (Fig. 14)
INSTALLATION INSTRUCTIONS
(CONTINUED)
Step 3 - Assembly Accessories
(continued)
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
