Installation Guide
Camera Login
Connect your camera with the Ethernet cable to a notebook that has an
installed SCPlayer on it.
You can find the LOGIPIX camera’s IP address on a sticker. Start the SCPlayer
program, and then connect to the camera by adding its IP address.
Enter the default user name and password (admin/admin) in the prompt
request dialogue. Note that user name is case sensitive.
NOTE
: The video stream of LOGIPIX-ONE will appear with lower fps in the
SCPlayer software, as it connects through a 100 Mbit Ethernet port.
Focus and Iris setup
Setup the focus
NOTE
: The focus setup must be performed with a fully opened Iris!
In case of a
l ens with manual iris:
•
Loosen the Iris fixing screw of the lens! Rotate it counter-clockwise!
•
Rotate the Iris ring of the lens counter-clockwise to fully open it!
•
Rotate the Iris fixing screw clockwise to tighten it and to fix the Iris
position!
In case of a P-iris lens
•
Enter the camera configuration menu in the SCPlayer software by
pressing
C
•
Locate the camera in the list on the left side of the window
•
Find the “Logipix settings” node
•
Select the “
III
” tab
•
Select P-iris, and save settings
16/18
