5
3)
If you have a Micro SD card, you can insert this at the same time.
4)
Once the device has connected to the network, you can screw the back cover back on and
disconnect the camera from the supply. The settings will be retained once it’s powered up
again.
The camera is now ready for hardware installation.
Hardware Installation
1)
Using the supplied template, mark out and drill the 4 holes for the camera base, using a
4mm drill bit.
2)
Insert the wall plugs and screw in the camera. Rotate the camera to get access to the top
screw holes and screw to the wall. Do the same for the bottom screws.