GB
5
Reverse the door swing
- Ensure the appliance is unplugged and empty.
- Adjust the two leveling feet to their highest position.
- We recommend you have someone to assist you.
Tools required
- Phillips style screwdriver
- Flat bladed screwdriver
- Hexagonal Spanner
Note: Take the door off it is necessary to tilt the larder backward. You should rest the larder on something solid and
place something under the rollers so that it will not slip during the door change process.
DO NOT lay the larder completely flat as this may damage the coolant system.
180ºC
1. Remove the screws at the rear of
top cover and then take the top
cover away.
2. Remove the screws and bracket from the topside
and fit back to where the hinge bracket was
located on the opposite side (right to left).
A spanner may be required to loosen the bolts fin.
3. Slide the door up and lift away
from the appliance.
4. Remove screws and hinge bracket and refit on
opposite side.
5. Slide the larder door back on to the
lower hinge. Making sure it’s the
right way up. Screw the hinge
bracket into place on the new side.
6. Check that door is aligned
horizontally and verti-
cally and that the seals are
closed on all sides before
finally tightening the bot-
tom hinge.
Re-adjust the leveling feet.
LLTL2488GS_GSE_GW_GWE_IB_100524.indd 5
5/24/10 2:14 PM
