
11
INSTALLATION
GB
3. Loosen the hinge pin, reverse it and put
it back to the hole, tighten into position.
4. Remove the lower screws, hinge bracket
and levelling feet from the unit bottom.
5. Refit the levelling feet, hinge bracket and
lower screws to the opposite side.
• Do not lay the unit flat as this may damage the coolant system.
• During door reversal, when swapping the position of the bottom hinge or
adjusting the levelling feet, tilt the unit. Do not lay the unit flat.
LTF55W20E_IB_5L_RC_200729_grace.indb 11
LTF55W20E_IB_5L_RC_200729_grace.indb 11
29/7/2020 10:59 AM
29/7/2020 10:59 AM