
25
GB
INSTALLATION
You may use a Y-Adaptor (not
included)for an additional water
feed for another appliance, for
example a washing machine.
This is only applicable for cold
water mains. A Y-Adaptor is
available from most DIY stores.
About the Safety Supply Hose
The safety supply hose consists of
the double walls. The hose’s system
guarantees its intervention by blocking
the flow of water in case of the supply
hose breaking and when the air space
between the supply hose itself and the
outer corrugated hose is full of water.
t
Do not bend your drain hose.
t
You may use the U-shaped drain hose
holder to secure your drain hose and to
avoid bending it.
t
Secure the water drain hose to the waste
pipe to avoid it coming off during the
washing process.
U-shaped drain
hose holder
water drain
hose
t
The waste pipe must only be
connected to the foul drains and not
the surface water drainage system.
t
The water drain hose should be
placed between 40 cm and 100 cm
from the floor level and must not be
extended, otherwise the unit may
not be able to expel the waste water
properly.
t
Please close the hydrant after using.
Before connecting to the waste pipe,
make sure to check the waste pipe
and remove any stopper or blockage
inside, otherwise the unit may not
be able to expel the waste water
properly.
LID60W16N_IB_5L_RC_160817_grace.indb 25
17/8/16 12:00 pm