Logik L90CHDG11, Инструкция по эксплуатации

Страница: 7 / 24

7
Cleaning and Maintenance
• All external surfaces and controls can be cleaned using a little washing-up liquid applied with a damp soft
sponge or cloth.
Grease Filters
The re-usable metal grease filters in the appliance remove solid particles (grease, dust, etc.) from the kitchen
vapours, preventing soiling of the cooker hood.
The grease filters should be cleaned regularly (at least every 3-4 weeks) to avoid a build-up of grease.
1. To take out the grease filter, press the plastic catch.
2. Pull aluminium filter downwards.
• Before any cleaning or maintenance work is carried out, disconnect the cooker hood from the
mains power supply. Ensure that:
– it is switched off at the isolator, or
– it is switched off at the wall socket and the plug is withdrawn, or
– the fuse from the fused spur connection unit is withdrawn, or
– the mains fuse is disconnected.
• The surfaces and controls are susceptible to scratches and abrasions. Please observe the following
cleaning instructions.
Do not use:
• cleaning agents containing soda, acids, chlorides or solvents,
• abrasive cleaning agents, e.g. powder cleaners or cream cleaners and abrasive sponges, as well as
pot scourers or sponges which have been used previously with abrasive cleaning agents as these
will damage the surface material.
Only use a damp cloth as water could get into the unit and cause damage.
An dirty filters is a fire hazard.
To avoid damaging the filters or the hob
below, make sure you hold the filters
securely at all times when handling them.
• Wipe dry using a soft cloth.
1
2