Logik L7SPDVD11, Инструкция по эксплуатации

Страница: 18 / 36

GB-18
Turning On the DVD Player
1. Slide the ON/OFF switch to ON position on the
side panel to turn the DVD player on.
2. The LOGIK DVD logo (start-up picture) will appear
on the screen and the unit will start loading the
disc automatically (if available).
3. After use, slide the ON/OFF switch to OFF position
on the side panel to turn the DVD player off.
Basic Playback
Ensure that the screen protection film is removed before use.
This instruction manual explains the basic instructions for operating this unit. Some
DVDs are produced in a manner that allows for specific or limited operation during
playback. Therefore, this unit may not respond to all operating commands. This is not
a defect.
Please refer to the instructions accompanying the specific DVD in question for more
information about the options available on that DVD.
“ ” may appear on the screen during operation. “ ” means that the desired operation
is not permitted by the unit or disc.
Basic DVD Playback
1. Make sure the unit is either plugged into the power
socket through the mains adapter or the battery is fully
charged.
2. Slide the ON/OFF switch to the ON position.
3. Press the OPEN switch to open the disc cover.
4. Hold the disc by its sides and carefully place onto the
disc holder with the label side facing up. Gently push
the disc down until you hear a “click” sound.
5. Close the disc cover. The unit starts playback if the disc does not have any menus
recorded on it. If the disc has one or more titles recorded on it, a menu screen will
appear on the screen.
6. To play a title, press the button on the unit or press the / 0-9 / 10+
buttons on the remote control to highlight the title and then press the ENTER
button on the unit or the remote control to confirm.
L7SPDVD11_IB_110322_Zell.indd 18 22/03/2011 12:15 PM