![Logik L612WSM16E Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/logik/l612wsm16e/l612wsm16e_instruction-manual_1935575025.webp)
INSTALLATION
25
GB
Connecting the Water Supply Hose
1. To prevent leakage from the connection
joints, ensure the rubber washer seals are
fitted to each end of the water supply
hose. Do not use without the seals in
place.
2. Fit the straight end of the water supply
hose to the cold water tap.
3. Connect the angled end of the white
headed hose to the water inlet valve on
the machine. Hand tighten the plastic
parts of the connections. If you are
unsure, please call a qualified plumber for
safer connections.
4. Open the tap slowly and check that
there are no leaks around the connection
joints.
Preventing a Frozen Water Supply Hose
If your washing machine is delivered in freezing weather
conditions, leave it at room temperature for 24 hours after you’ve
set it up before using it. This ensures there’s no ice blocking
the water supply hose. If your water supply hose freezes, add
2 or 3 litres of warm water to the drum. Then run a “Drain” only
programme.
3/4”
3/4”
min. 10 mm
min. 10 mm
Plastic joint
Water Supply Hose
Points to remember
• Follow the instructions in this section to avoid water leaks.
• Don’t connect the hose to a combination tap.
• Don’t twist, squash, modify or cut the hose.
• This machine is designed to connect to the cold water supply. Do not connect to the hot
water supply.
• Use only the new water supply hose supplied. Old hose sets should not be reused.
about
50°C
about
50°C
L612WSM16E_IB.indb 25
21/03/2016 16:04
Содержание L612WSM16E
Страница 2: ...L612WSM16E_IB indb 2 21 03 2016 16 04...
Страница 133: ...L612WSM16E_IB indb 133 21 03 2016 16 04...
Страница 134: ...L612WSM16E_IB indb 134 21 03 2016 16 04...
Страница 135: ...L612WSM16E_IB indb 135 21 03 2016 16 04...