18
GB
Initial S
etup
6. Channel tuning will commence. This operation may take up to 6
minutes. The display will show the progress of the tuning and the
number of channels found.
7. If you want to skip the ATV tuning, press the MENU button to
interrupt the tuning half way. A pop-up screen will be displayed,
press the button to select YES to confirm. You will then go
straight to DTV tuning. You may repeat the above step if you also
want to skip the DTV tuning. An installation reminder will appear
the next time you turn on the TV.
8. After tuning is complete, the channels are arranged in the
broadcaster's preset order. If you wish to skip channels, modify
the preset order or rename channels, select Channel Edit under
the Channel menu (refer to page 22-23 for details).
Channel Tuning
TV : 0 Channel
DTV : 0 Channel
Radio : 0 Channel
Data : 0 Channel
1 %... 471.25 MHz (TV)
Please press MENU key to skip
5. Press the
buttons to navigate the menu and change the
settings. Press the OK button to confirm.
OSD Language
Select your desired language to be displayed on
the menu. The default on-screen menu language
is set as English.
Country
Select the country where you will operate the TV.
The default country is set as UK.
Turning the TV on for the First Time
1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. Switch on the POWER ON/OFF switch which is located at
the rear of the TV next to the mains cable. At this stage, the
TV switches to standby mode. The red LED indicator will
illuminate on the front panel of the TV.
3. In standby mode, press the / I button at the front right side
of the TV or the button on the remote control to turn the
TV on. The red LED indicator will turn blue.
4. The first time you turn the TV on, it will go straight into the
First Time Installation menu. Please ensure the aerial is
plugged in and then press the OK button. (If you have already
installed the TV using the Quick Start Guide, please go to the
next step “Selecting the Input Source” on the next page.)
Please ensure aerial is plugged in!!
Then press OK button to start
Please select an OSD Language
Deutsch
Español
Français
Português
Italiano
English
Country
France
Germany
Portugal
Italy
Spain
UK
Menu
Always disconnect the TV from the mains socket when
not in use for a long period of time.
The / I button at the front right side of the TV or
the button on the remote control is only used for
switching the TV into standby, it does not disconnect
the TV from the mains power. To completely disconnect
the mains power, please remove the mains plug from
the mains socket or switch off the POWER ON/OFF
switch.
Initial Setup
To the mains socket
