Logik L3DAB12, Инструкция по эксплуатации

Страница: 8 / 20

GB-8
Basic Operation
Powering ON/OFF
Connect the unit to the mains socket and switch the
ON/OFF
switch at the back of the
unit to “ ON ” position to switch the unit on.
• Press the
STANDBY
button to switch the unit back to
Standby
mode.
• Switch the
ON/OFF
switch to the “
OFF
” position to turn the unit off.
• Disconnect the mains adapter from the mains socket if you want to switch the
unit off completely.
Selecting Modes
Press the
DAB/FM
button repeatedly to switch between modes (
DAB
or
FM
).
Adjusting Volume
Turn the /
–
dial to increase/decrease the volume.
Software Version
1. Press and hold the INFO button for 2 seconds and then release it to view the
software version of this unit.
2. The software version will automatically disappear after 5 seconds.
System Reset
There may be times when you need to reset your unit back to the factory settings. If
you experience reception problems you may want to reset and try again. If you move
the unit to another part of the country and pick up the local and national DAB stations
in that area, your previously tuned channels may no longer be available.
1. To do the system reset, press and hold the INFO button until the software version
display.
2. Press the
INFO
button, and press the
SELECT
button, and display will show “Press
select key to reset”.
3. Then press the
SELECT
button to start the system reset. The unit will then start
the Quick Scan for DAB channels immediately.
After the system reset, all the tuned stations, DAB & FM preset stations setting
will be erased.
L3DAB12_IB_Final120619.indd 8 19/06/2012 9:51 AM