14
5. Your TV should be automatically sent to the correct OSD language and
Country. So simply press OK to start tuning in your TV.
If you need to change the OSD language and Country press the
buttons. Leave the TV in Home mode.
Initial Setup
Turning the TV On for the First Time
1. Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF IN socket at
the rear of your TV.
Do not connect the TV to the mains supply until you have completed all the connections.
RF coaxial cable
(not included)
OR
2. Connect the mains cable to the mains socket after
you have completed all the connections.
3. In standby mode, press the button on the remote
control to turn the TV on. The red LED indicator will
turn blue.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The STANDBY button on the front right side panel of the TV or the button on the remote control is only used for
switching the TV into standby, it does not disconnect the TV from the mains power. To completely disconnect the
mains power, please remove the mains plug from the mains socket.
To the mains
socket
4. The first time you turn the TV on, it will go straight into the First Time
Installation menu. Please ensure the aerial is plugged in and then press
the OK button. (If you have already installed the TV using the Quick Start
Guide, please skip this section).
Please ensure aerial is plugged in!!
Then press OK button to start
First Time Installation
Country
Ireland
Home Mode
Next
OK
OSD Language
English
L32HED14I_IB.indd 14
28/08/2014 17:31
