Logik L2STB11, Инструкция по эксплуатации

Страница: 24 / 44

4. Press the buttons to select the desired
option and then press the buttons to
change the setting. Press the
OK
button to
confirm.
3. Press the buttons to select
TV Setup
and
then press the
OK
button.
TV Setup
1. Press the
MENU
button to enter the
MAIN
MENU
.
2. Press the buttons and then press the OK
button to select
Setup
.
SETUP MENU
Languages
TV Setup
Parental Control
Service Setup
Software Update
System Information
Auto Standby Setting
Enter Menu Select
OK
TV SETUP
Television type
Widescreen
Standard
Change Select


16:9
Letterbox
RGB
If selecting 4:3 you have additional settings available to choose between
Letterbox and Full Frame. There will be two blank bars on the top and bottom
of the screen if a 16:9 program is broadcast.
Some older TVs may not support RGB. RGB will give you a better picture
quality than CVBS and is the default setting.
MAIN MENU
Channel Organiser
Favourites
Setup
Multimedia
OK
Enter Menu Select
5. The standard setting is used to select between RGB and CVBS.
Television Type Select the aspect ratio (4:3 / 16:9) that this unit is connected
to.
Widescreen Select what the user requires to be displayed for 16:9
transmissions (Letterbox / Full Frame).
Note: This option is only available when 16:9 format content
is transmitted under 4:3 Television Type option.
Standard Set the SCART output mode (CVBS / RGB).
Note: Select CVBS to output a standard composite video.
Select RGB to output a better picture quality.
24
L2STB11_IB_110608_Annie.indd 24 11年6月8日 下午3:32