Logik L24HEDP15, Инструкция по эксплуатации, Страница: 9 / 52

9
1. Press the button in the middle of the stand neck and
gently pull the stand away from the TV.
1. Ensure the TV is switched off and not connected to the mains power supply.
2. Lay the TV down on a flat surface ideally on the edge of a table so the base of the TV slightly overhangs the edge of the table,
with the back side facing up. Please make sure a soft cushioned material (such as a dry bath towel or thick piece of foam) is
placed beneath the screen.
3. To install, slide the TV stand into the slot on the bottom of the TV. Make sure it clicks into position.
Installing / Removing the Base Stand
The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be
sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with
it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
• Please read this instruction manual carefully while setting up your TV.
• If you require additional assistance please call our UK Call Centre on 0344 561 1234. Our UK
Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Remove the stand assembly before mounting the TV onto the wall.
SCART
SPDIF
VGA
ANT
.
HDMI 1 HDMI 2
SCART
Table Cushioned material
Mounting the TV to a Wall
2. This TV is designed to be wall-mounted with
a standard 75 mm x 75 mm mounting kit
(sold separately) designed for flat-panel TVs.
Mount this TV according to the instructions
included in the mounting kit. Due to space
restrictions, we recommend that you make
all connections before mounting on to
the wall.
SCART
SPDIF
VGA
ANT
.
HDMI 1 HDMI 2
SCART
SPDIF
VGA
ANT
.
HDMI 1 HDMI 2
75mm
Four mounting holes
(size M4 screw)
75mm
L24HEDW15/P15_IB.indd 9 19/04/2015 21:46