20
GB
Switching the Unit Off
• Turn the Power Control to the “OFF” position.
• Turn the Thermostat Control to the “MIN” position.
• Unplug from the mains supply.
Safety Protective Devices
Overheat Protection System
The power to the heater will automatically cut off if the temperature of the heater exceeds
a certain limit. In the event of overheating, the heater will stop operating. Switch the heater
off and allow it to completely cool. The heater will then resume operating as normal.
Tip-over Protective Switch
When you use the heater in an upright position on a flat and stable surface, the tip-over
protective switch will be on. In the event the heater is knocked over, the heater will stop
functioning automatically.
Do not override the tip-over protective switch as this may cause a hazard.
Using the unit on a deep pile carpet may activate the tip-over protective switch.
Cleaning
Your heater should be cleaned regularly to prevent dirt and dust from building up which
will affect its performance. Ensure the air inlet and the air outlet are not blocked. This can
be done with a vacuum cleaner, using the brush attachment.
Ensure you unplug your heater from the mains socket and wait for the heater to
cool down completely before cleaning.
L20PTC16E_IB_5L_RC_180622_grace.indb 20
22/6/18 11:54 am