17
TURnInG THe UnIT On
When the AC power cord is connected, the standby indicator lights on. Press the
/ I button to turn
the unit on, the standby indicator will blink for about 10 seconds for loading, and will finally light off until
the above screens shown. Press the
FUnCTIOn button to select the desired mode (DTV, TV, AV1,
AV2/SCART, YUV/SCART, DVD or HDMI). If you select DVD mode, the DVD logo will appear on the
screen.
Note:
When the unit is not going to be used for a long time, disconnect the AC power supply cord from AC
outlet.
TURnInG THe UnIT On FOR THe FIRST TIme
The first time you turn the unit on, it will go straight into Auto scan mode. Simply follow the screen
prompts as below to tune in the channels.
1. Use the / button to select the screen menu language you prefer.
2. Use the button to move to Auto Tuning, press the
enTeR/OK button to enter Auto Tuning
menu.
3. Use the / button to select the Country you are in.
4. Use the button to move to Start. Press the
enTeR/OK button confirm Start. The system will
automatically start to scan and preset all available programmes.
5. After scanning has finished, the TV will display the first programmes stored of DTV programme.
BaSIC OPeRaTIOn
PReP
aRa
TIOn
COnneCTIOnS
USInG
THe Fea
TUReS
SPeCIFICa
TIOn
TR
OUBLeSHOO
TInG
USInG
THe
D
V
D
Fea
TUReS
PReP
aR
a
T
IO
n
COnneCTIOnS
USInG
THe Fe
a
T
URe
S
USInG
THe
D
V
D
Fe
a
T
URe
S
TR
OUBLeSHOO
TInG
SPeCIFIC
a
T
IO
n
