GB
18
After Use
After you have finished blending:
1. To power off, turn the OFF/ON dial to 0.
2. Unplug the blender from the mains socket.
3. Hold the jug by the handle, turn and carefully lift to release the jug. (This may be easier
with one hand on the base and one hand holding the jug handle).
4. Lift off the lid and pour or spoon out the contents carefully.
Cleaning
Cleaning the Blender Jug
1. Pour about 500ml of warm soapy water into the jug and place the jug on the base.
2. Use the pulse mode to loosen any food particles and free them from the blades.
• Remove the jug, pour away the water and rinse in fresh running water. Repeat steps 1
and 2 with fresh water.
• Alternatively the jug may be immersed in warm soapy water and cleaned using a long
handled brush. Do not touch the blades when cleaning.
• Wash the lid and measuring cup separately in warm soapy water, rinse and allow to
dry.
• The jug body should be handled carefully. The jug contains moving parts - do
not leave the jug immersed in water for longer than necessary to clean it or
you may affect the operating performance of the blender.
• Handle blades with care especially during cleaning as they are extremely
sharp.
• DO NOT wash the jug or attachments in a dishwasher.
Cleaning the Base
1. Ensure the blender is switched off and unplugged from the mains.
2. Wipe the outer surface of the motor unit with a damp cloth. Never use abrasive cleaners
or scouring creams.
Never immerse the base in water when cleaning.
L100BL14E-BR_W16E_IB_5L_RC_161118_grace.indb 18
18/11/16 4:29 pm
