4
Likewise, charging the Battery Pack is also very simple. Just follow this procedure to charge your battery:
1.
Attach a Logicube external power source or a second Battery Pack to the DC Power receptacle;
please refer to the diagram below.
2.
The red charging light will start to flash. After 60 – 120 seconds it will stop flashing and stay lit.
3.
The Power Gauge will slowly increase until the battery reaches full charge.
4.
Once the battery is fully charged, the green “Fully Charged” light will come on.
The charging process will take about three hours. It may take longer if the battery is trying to recover from
a “deep discharge state”.
Discharging
During discharging, the system automatically displays the current stored power of the battery. The total
discharge time is a function of the hard-drives. The total time can be estimated by correlating the power
gauge changes with elapsed time.
The following charts illustrate the rate of discharge with different hard drives and Logicube Drive
Duplication devices. The first chart is for one Battery Pack and the second chart covers two Battery Packs
“Daisy-chained” together:
Chart 1. Single Battery Pack Discharge Rates.
