LogicPower LPT-1000RL, Руководство пользователя

Страница: 11 / 18

W W W . L O G I C P O W E R . U A
• Do not operate the device with mechanical damage of the housing and/or
power cable, if there are elements that move freely inside te housing, water or
other liquids inside the housing, metal conducting parts (including metal
chips and dust), in the presence of contact with acetone, gasoline and other
chemically active, explosive and fire hazardous substances.
•FEATURES
• Lowered and exceeded voltage protection
• Short circuit and overload protection
• Overheat protection
• Built-in power filter (impulse noise protection)
• Compact design
• Led indicators
•SAFETY INSTRUCTIONS
• Do not open or disassemble the device. Do not make changes to the scheme
• It is not allowed to connect a device of higher power than indicated on the
packaging of the device.
•STARTING OPERATION
• When operating, the housing can become very hot, so it is necessary to
ensure good ventilation.
• It is not recommended to connect electric heating and industrial devices to
the stabilizer.
To turn up the product you must connect it to the mains 220V and turn on
the power switch. At this time, the “POWER” indicator should light up,
some delay (up to several seconds) is possible between the switch on time and
the start of stabilizer operation. The shutdown is performed in the reverse
order.
• Do not use the stabilizer for industrial purposes.
• After the end of using the device, it is recommended to disconnect it from
the power network.
9