2
CaretakerSentry®
v3.10
THESE INSTRUCTIONS ARE FOR THE DEALER. REFER TO THE “QUICK
START GUIDE” FOR BASIC INSTALLATION.
These instructions are for the Dealer to set-up and program the CaretakerSentry System to operate with the Central
Station of your choice.
The CaretakerSentry product (the “System”) uses the industry standard “Contact ID” and “4+2” protocols.
Voice prompts provide easy set-up and testing.
Basic set-up requires you to:
•
Install the 4 AA rechargeable Ni-MH batteries in the Base unit.
•
Plug the base unit into AC power (not a switched outlet)
•
Connect to a wired telephone connection – Line In
Basic programming requires you to enter:
• The central station telephone number(s).
• The 4 digit account code of your customer.
There are several special options you can set for additional features - these include:
•
Changing the 4 digit factory passcode to a passcode of your choice – to prevent unauthorized reprogramming
•
You should enter two telephone numbers - the primary number should be the alarm receiver’s toll free number
and the secondary number should be the alarm receiver’s local long distance number, in case the first number is
busy or unreachable.
•
You can program the System to send Restore Codes.
•
You can program the System to send a Periodic Test Signal Every Day, Every Week or every 30 days.
•
The System can learn up to a total of 9 Pendants.
NOTE: At any time in the future, you can remotely change all of these setting over a telephone line using any touch-
tone phone.
NOTICE - Please read all of the Limitations of Liability, Disclaimer and Limited Warranty that are in the User Quick Install
Guide.
