background image

English

3

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver. 
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
—Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 
This equipment should be installed and operated with a minimum distance of 20 centimeters between the 
radiator and your body. 
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired 
       operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized 
modifications to this equipment. Such modifications could void the user authority to operate the 
equipment.

This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: 
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation 
      of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. 
L'exploitation est autorisée aux deux conditions suivantes : 
(1) l'appareil ne doit pas produire de brouillage, et 
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 
      susceptible d'en compromettre le fonctionnement.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and 
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and 
compliance.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la 
conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition 
et la conformité de rf.

This equipment should be installed and operated with a minimum distance of 20 centimeters between 
the radiator and your body.

Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres 
entre le radiateur et votre corps.

FCC Radiation Exposure Statement

Caution!

IC Statement

 

 

 

Содержание Scuderia FS1 (2LFS001)










Отзывы: