LOGIC X4.5 7
2B
Micro SD Card Installation and Operation
3B
A Micro SD card is a removable mobile memory card inside the mobile phone used for
extending the internal storage space of the mobile phone.
1.
To install the Micro SD card, carefully remove the back cover of your phone.
2.
Remove the phone’s battery.
3.
Locate the Micro SD card slot and just slide-in the card with the gold contacts facing down.
4.
To remove the Micro SD card, just slide-out the card carefully to remove.
5.
Replace the battery and the back cover.
4B
Charging the Battery
1.
5B
Connect the wall charger to the included USB cable.
2.
6B
Connect the charger plug to the power outlet.
3.
7B
Connect the USB cable to the mobile phone; once connected this icon
indicates the
charging status.
4. The battery is fully charged when the status icon changes to
; please disconnect
the charger from the power outlet.
5. Disconnect the charger from the mobile phone.
Note:
If the battery isn’t used for a long period of time or the battery is depleted, the
mobile phone may not turn-on like normal while charging. This is normal. Please charge for a
while before turning on the mobile phone.
The battery can be charged repeatedly; however, it is a consumable product. Please
purchase a new battery if you the notice a significant reduction in the standby time.
Using data services consumes more battery power and will reduce the standby time.
The charging time may be affected by the temperature and battery usage.
The mobile phone will show a prompt if the battery level is too low. The mobile phone will
power off automatically if the battery level drops below a certain level.
