5
WIRING CONNECTION
LINE OUT
LINE OUT
ANTENNA
CONNECTOR
FRONT
REAR
AUDIO OUT
CAMERA IN
VIDEO IN
VIDEO OUT 1
VIDEO OUT 2
FUSE 10A
L
R
L
R
L
R
ISO CONNECTOR
B
A
1
2
3
4
5
6
7
8
4
5 7
8
R
FRO
RE
CAMERA IN
VIDEO IN
L
L
To hand brake switch
To reverse gear control switch
To rear camera video out
LINE OUT
LINE OUT
ANTENNA
CONNECTOR
FRONT
REAR
AUDIO OUT
CAMERA IN
VIDEO IN
VIDEO OUT 1
VIDEO OUT 2
FUSE 10A
L
R
L
R
L
R
ISO CONNECTOR
B
A
1
2
3
4
5
6
7
8
4
5 7
8
R
FRO
RE
CAMERA IN
VIDEO IN
L
L
To hand brake switch
To reverse gear control switch
To rear camera video out
CONNECTOR A
4. 12V
5. AUTO ANTENNA OUTPUT
7. +12V (TO IGNITION KEY)
8. GROUND
NOTE: (connector A no. 7) must be connected (ACC) in order
to avoid weakening the car battery when the motor will not be
running for long periods.
CONNECTOR B
1. REAR RIGHT SPEAKER (+)
2. REAR RIGHT SPEAKER (-)
3. FRONT RIGHT SPEAKER (+)
4. FRONT RIGHT SPEAKER (-)
5. FRONT LEFT SPEAKER (+)
6. FRONT LEFT SPEAKER (-)
7. REAR LEFT SPEAKER (+)
8. REAR LEFT SPEAKER (-)
Maintenance
FUSE REPLACEMENT
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after the
replacement, there may be an internal malfunction. In this case, consult your nearest repair center.
Warning
Use the specified amperage fuse for each lead. Use of a higher amperage fuse may cause serious damage.
B
1
3
5
7
2
4
6
8
5
7
4
8
A
DRIVING WITH VIDEO DISPLAY
Follow the instructions below so video will display even when the vehicle is in motion.
Caution: Always follow local laws regarding driving with video.
INSTALLING REAR CAMERA FOR REVERSE MOTION
Follow the instructions below to have the unit automatically switch to a read camera (not included) to
guide the driver when parking or moving in reverse.
Steps: Connect the GRAY wire to the WHITE wire.
Steps:
1. Connect the Rear Camera IN plug to the rear camera’s
video out plug.
2. Connect the RED wire to “REVERSE” gear control switch.
3. Check your gear control switch and make sure it is
connected to +12V.
