Logic Supply Karbon 300, Руководство пользователя

Страница: 91 / 92

Karbon 300 Rugged Computer
91
Command Value Description
set [option] [value]
Changes setting in user confi guration to a new value.
option [value]
One of the user-selectable options. These include:
ignition-sense
on
The system will respond to inputs on the
ignition sense pin.
off The system will ignore all ignition events.
startup-timer
Sets delay before system powers on after detecting
ignition. Only valid if ignition sense is ‘on’.
0~9999 Seconds
auto-power-on
on
The system will power on when attached to
AC power.
off
The system will follow the BIOS confi guration.
Note: It may be desirable to enable this
setting as well as any BIOS options, as this
option will persist even if the CMOS is cleared.
shutdown-voltage
Sets the voltage that will trigger shutdown. This
is designed to protect automotive systems from
battery drain. The delay between detecting this
low voltage and a shutdown triggering is also
programmable.
0~30 Volts
hotplug
Enables or disables display port hotplug detect.
on Enabled DisplayPort hotplug detect.
off
Disabled DisplayPort hotplug detect. The
K300 will assume that both ports are
connected to a device.
shutdown-timer
Sets the time, in seconds, before the K300 will
soft power off after passing the shutdown voltage
threshold.
0~9999 Seconds
can-baudrate
Sets the baudrate for the K300 CAN device.
100~1000 kbit/s
dio-bio-switch
A switch to control the power state of the K300 with
digital inputs. In order to use this feature, the digital
inputs must be powered externally.
on
The digital inputs will act as a remote power
switch when the system is off or sleeping.
When the system is on, they will behave as
normal digital inputs.
off
Digital inputs will behave as normal digital
inputs and will not control the power state of
the system.
hard-off -timer
Sets the time, in seconds, before the K300 will enter
a very low power mode after passing the shutdown
voltage threshold.
0~9999 Seconds
boot-confi g
Determines which user confi guration will be loaded
when the K300 is attached to AC power. Only one
confi guration may have this value set as ‘true’. By
default, user confi guration one will be loaded at
boot.
true
Sets the confi guration to be loaded upon AC
power-up.
false
Disables the confi guration to be loaded upon
AC power-up.