Logic Controls CR3002, Руководство пользователя

Страница: 5 / 7

INSTALLATION
Your cash drawer has been pre-assembled to make the installation
as simple as possible.
Model CR3002
1. Remove the cash drawer from its shipping container.
2. Remove the keys and interface cable from its plastic bag.
3. Connect the DB9 connector of the interface cable to the
computer COM1(or COM2) port.
4. Connect the DB25 connector of the interface cable to the the cash
drawer.
FUNCTIONAL TEST
The following test sequence will verify that your cash drawer is working
properly. Before you start this procedure, you must install the cash drawer
correctly as outlined in the installation section.
NOTE: The actual key entries are enclosed within quotation marks (“ “). Do
not type the quotation marks as part of your entry.
1. From the C prompt type “MODE COM1 96,N,8,2” and press ENTER.
2. Type “TYPE CON>COM1” and press ENTER.
3. Type any alphanumeric character(s) and press ENTER. The cash drawer
will open.
4. To return to the C prompt press and hold the CTRL key while depressing
the letter C.