![background image](http://html.mh-extra.com/html/sealey/ap2406/ap2406_instructions_1225419001.webp)
instructions for
rollcabs 6-10 drawer
model no’s:
aP2406, aP2408, aP2410
Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFeTY
warNING!
ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this product.
8
do NoT
open more than one drawer at a time.
8
do NoT
step on the drawers.
8
do NoT
let children play with the roll cab.
9
ensure all drawers are fully closed and the self locking catches are activated, before moving the toolbox.
9
secure the brakes when rollcab is in the desired position.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
8
do NoT
use in damp work areas.
warNING!
the warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and
situations that may occur. it must be understood that common sense and caution are factors which cannot be built into this product, but
must be applied by the operator.
2. INTroducTIoN
Heavy gauge steel with double wall construction for extra strength and durability. Ball bearing drawer runners provide superior performance and
carry heavier loads. Each drawer fitted with catch to prevent accidental opening when being transported around the workshop. Added security
provided by side mounted cylinder lock, supplied with two keys. rubber grip side handles for comfort and ease when manoeuvring. rust and
solvent resistant powder coat paint finish. Fitted with anti-shock protection on all four corners to prevent accidental damage. Features two
Ø125mm swivel castors with large toe locks and two fixed wheels. Tough composite top for fitting and securing top box or can be used as a
workstation. Unique design fitted with perforated side panels for hanging tools and accessories.
3. sPecIFIcaTIoN
Original Language Version
© Jack sealey limited
refer to
instruction
manual
model no
AP2406
AP2408
AP2410
overall size
Width
765mm
765mm
765mm
depth
465mm
465mm
465mm
Height
960mm
960mm
960mm
drawers (Qty)
medium
3
6
10
large
2
2
X - Large
1
drawer Width
535mm
535mm
535mm
drawer depth
390mm
390mm
390mm
drawer Height (medium)
60mm
60mm
60mm
drawer Height (large)
130mm
130mm
Drawer Height (X - Large)
195mm
AP2406, AP2408, AP2410 Issue:4(F) 23/04/18