LOGAN FRIABILITY TESTING SYSTEM
FAB-2S FRIABILITY TESTER
Page
8
of
12
Set Minutes:
A.
Press “Set” button, the third to last digit will start flashing.
B.
Press “Enter” to increase the flashing digit. (Skip step B if no change is required.)
C.
Press “Set” button, the fourth to last digit will start flashing.
D.
Press “Enter” to increase the flashing digit. (Skip step D if no change is required.)
Set Hour:
A.
Press “Set” button, the first digit will start flashing.
B.
Press “Enter” button to increase the flashing digit. (Skip step B if no change is required.)
C.
Press “Set” button to end the setting process.
5.4
Counter Mode
With counter indicator light on, display shows a default revolution count of 0:01:00.
This means when “Start/Stop” button has been pressed drum will go 100 rotations and then
stop.
To Set Timer Mode:
(Make sure the counter indicator light is on before proceeding.)
Set Revolution Count:
A.
Press “Set” button, last digit will start flashing.
B.
Press “Enter” button to increase the flashing digit. (Skip step B if no change is required.)
0:0
0
:00
0:
0
0:00
0
:00:00
0:00:0
0
