L o g a n G r a p h i c P r o d u c t s I n c . , 1 1 0 0 B r o w n S t r e e t , W a u c o n d a , I L 6 0 0 8 4 T o l l F r e e 1 8 0 0 3 3 1 6 2 3 2 w w w . l o g a n g r a p h i c . c o m
1
S I M P L E X
M O D E L 7 0 3
V-Groover
V-GROOVER HEAD
1. FIXED BLADE LEVER
2. ADJUSTABLE
BLADE LEVER
3. OVERCUT ADJUSTMENT POST
4. OVERCUT ADJUSTMENT SCREW
5. UPPER KNURLED SCREW
6. LOWER KNURLED SCREW
7. WIDTH
ADJUSTMENT
LOCK LEVER
8. NYLON GUIDE
9. WIDTH
SCALE
10. V-GROOVER BASE
ADJUSTABLE BASE
17. SPACER BARS
14. STOP SCALE
13. STOP BLOCK
ARROW
15. STOP LOCK
LEVER
16. SCALE LOCK KNOB
12. STOP BLOCK
11. STOP FOOT
18. ADJUSTABLE
BLADE HOLDER
Explanation of Parts
1&2 Fixed Blade/Adjustable Blade Levers - Levers used to insert and remove blades for cutting V-Groove.
3&4 Overcut Adjustment Screw/Post - Screws used to fine tune overcut amounts. Screws take #1 straight edge screwdriver.
5&6 Upper and Lower Knurled Screws - Located on the levers, these screws hold the blade in position for cutting.
7
Width Adjustment Lock Lever - When loosened, allows for adjustment of V-Groove width from 1/32" to 5/64".
8
Nylon Guide
9
Width Scale
10
V-Groover Base
11
Stop Foot - Used to position stop at end of mat board.
12
Stop Block
13
Stop Block Arrow
14
Stop Scale
15
Stop Lock Lever - Used to lock stop in position on guide rail.
16
Scale Lock Knob - Knob which allows adjustment of scale.
17
Spacer Bars - Aluminum spacers used against mat guide to compensate for offset blade location.
18
Width Adjustment Blade Holder - Blade holder which slides to adjust V-Groove width.
Contents of the Model 703
Simplex V-Groover Carton
1 V-Groover
head
2 Adjustable
stop
3 Two 1/2" spacer bars
4 Five pieces of sample mat board
5 Six Logan #1258 blades
6 Fully illustrated instruction manual
