1
Remove the contents from the fire and
assemble the pedestal and base unit
using the nuts and bolts supplied.
(Note: the 4 longer bolts are for stage 2).
The ash shelf also needs bolting to the
lower front of the unit at this stage as well.
2
Lower the fire onto the now assembled
pedestal and base unit and bolt to the fire.
3
Place assembled fire in position and
seismic restraint to the floor.
4
Next, if not already fitted in place, fit the
baffle plate into place. The baffle plate is
to be situated in the upper half of the fire
and sits onto the brackets welded inside
the firebox.
5
The Ash shelf will need to be unpacked
and assembled to the firebox.
Attention
The air bar may need to be put into position.
Please ensure the tab on the side of the fire
is tapped over to secure the air bar in place.
To remove the air bar simply pry the tab
open with a screwdriver.