LOG Cube, Руководство пользователя

Страница: 9 / 10

Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logaudio.com
7
CUBE
User Manual
Disposal
Never dispose of the CUBE with normal household waste. It is strongly recommended to take the product
to an official waste collection point. Be aware of local regulations for separate collection of electrical and
electronic equipment and follow it diligently. Proper disposal of old products helps to prevent negative
environmental and health effects.
Troubleshooting (PROLOG 2)
Problem Possible cause Solution
No sound
Mute-mode is active
Press the “ Mute “ or “ Volume up + “ button on the inclu-
ded remote control to deactivate the mute mode.
No connection
There may be no connection via Bluetooth or WiFi.
Check if the audio source is near the audio system.
If necessary, reduce the distance between the audio
source and the audio system.
No input signal
Check that you are actually connected to “PROLOG“
via Bluetooth, AirPlay® or UPnP/DLNA. If necessary,
disconnect and reconnect.
No power supply
Make sure the power plug of the CUBE and the PRO-
LOG is well connected in the power outlet.
Audiosource is on mute
Make sure that you have not turned down the volume
at the audio source. Slowly increase the volume.
Signal too quiet
Input signal is too quiet Increase the volume at the audio source.
Volume has been set too low with
remote control
Increase the volume by pressing the “ Volume up + “
button on your remote control.
Signal too loud
Input signal is too loud Decrease the volume at the audio source.
Volume has been set too high with
remote control
Decrease the volume by pressing the “ Volume down - “
button on your remote control.
Simultaneous playback of multip-
le audio signals
Unintentional playback of multiple
signals
Stop playing one or more unwanted sources (analog
input, digital input, Bluetooth, AirPlay® or UPnP/DLNA)
to your PROLOG.