LOG Cube, Руководство пользователя

Страница: 7 / 10

Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logaudio.com
5
CUBE
User Manual
Pairing the remote control
At factory settings, the remote control is not paired with the PROLOG 2. If you have several remote controls of the same
type, pairing is useful to avoid conflicts.
1. Use a pen or a straightened paper clip to press the pairing button on the back of the PROLOG
2. The device is now in pairing mode for
30 seconds
3. Now press any key on the desired remote control (e.g. the “ Mute “-key)
4. The device is now paired with this remote control and accepts only commands from this remote control
Note : If the PROLOG 2 does not receive any command from a remote control during the 30 seconds it is in pairing mode,
the pairing is canceled and the PROLOG 2 accepts commands from any remote control of the same type.
Wake-up function
In case of inactivity, the CUBE automatically activates the standby mode after a while to avoid unnecessary power
consumption. The automatic wake-up functionality automatically reactivates the CUBE when there is an incoming audio
signal. Accordingly, the loudspeakers can remain permanently connected to the power connection without affecting the
energy consumption or the lifetime of the product.
Sound optimization
In order to achieve an optimal sound experience, it is advisable to observe the following points:
- Place your CUBE speakers near a wall. At least 15 cm distance to the wall is necessary to guarantee optimal
sound development for the rear subwoofer. Avoid placing the CUBE speakers in the middle of the room, as certain
frequencies are not sufficiently reproduced by the missing wall surface.
- Your CUBE speakers offer a unique, lossless music reproduction – especially in combination with a PROLOG. It is
therefore advisable to play high-resolution music files or uncompressed formats (such as WAV or Apple Lossless).
- Make sure your room has adequate acoustic damping. Too much reverb negatively affects the music signal.
Curtains, upholstered furniture or carpets can support good room acoustics and contribute to a pleasant damping.
- For the best possible sound quality, the entire signal routing should be digital. Use the digital audio input of your
PROLOG to connect players and connect the CUBE and PROLOG via the digital XLR connectors. This ensures
lossless signal transmission.
Note : There are no rules that apply to all environments. Nevertheless, it is advisable to consider the above points.