LOFTNESS GrainLogix GBL12A, Руководство пользователя и каталог запасных частей

Страница: 29 / 150

21 Grain Bag Loader OM
Set-up Instructions
Initial Set-up (Cont’d)
Swing Tube/Spout Assembly (GBL12 only)
1
1
4
3
2 5
Remove the plastic cover from over the swing tube spout
for easier access to the gearbox .
Install the 5/16" key (1) on the gearbox output shaft .
Align and install the gearbox sprocket (2) onto the
gearbox output shaft . Secure the gearbox sprocket using
a 3/8" x 3" Grade 8 bolt (3) and lock nut (5) .
Install the 3/8" set screw (4) .
1
2
3
4
5
6
7
7
Install six slider bushings (7) . Slide the spout assembly
(1) onto the swing tube until it is against the angle flange .
Fasten the spout to the tube using the four retainer plates
(2) using two 3/8" x 1-1/4" bolts (3), lock washers (4), and
plastic spacer bushings (5) and one slider bushing (7) .
NOTE: Do not over tighten these bolts. The spout must
be able to rotate on the tube.
The tube wrap (6) welded to the swing tube must be
oriented to the bottom as shown .
1
2
Install the 50-2 x 18 pitch roller chain (1) around the
coupler sprockets as shown .
Remove the backing paper from the 42" foam strip .
Wrap the foam strip (2) around the lip of the swing tube
which is inside the swing tube spout .
NOTE: Make sure the foam is tight against the inside of
the spout plate.
1
Reinstall the plastic spout cover removed earlier .