LOFTNESS 48MH, Руководство оператора / Каталог запасных частей

Страница: 25 / 46

Owner’s Manual (Hydraulic Flail Mower)
N14800 3 - August, 2004
3
Maintenance
Rotor Removal (Mower in Upside Down
Position) Continued:
5) Remove the nuts and lock washers on
the (2) 1/2” bolts and remove the
bearing guard on the right side of the
mower.
6) Remove the flat head screw, the star
washer, and the bearing retaining washer
from the rotor shaft on the right hand
side of the mower.
7) Repeat step 3 on right hand side.
8) Lift rotor out of machine.
9) Slide anti-wrap plates off shafts. Remove
spacer shaft of rotor.
10) Reverse the above noted procedure for
installation.
Storage:
End of the Season
•
Clean entire mower thoroughly.
•
Clean the belt and pulleys, relax the belt tension.
•
Lubricate all parts of the machine. (See
lubrication section)
•
Paint all parts that are worn or rusted.
•
Store mower in a clean dry place.
Beginning of the Season
•
Review your operator’s manual.
•
Lubricate all parts of the machine (See
lubrication section).
•
Tighten all bolts, nuts and set screws.
•
Reapply tension to belt so there is ½” deflection
at midpoint between the pulleys.