LOFTNESS 1081A150, Руководство оператора / Каталог запасных частей

Страница: 9 / 36

Owner’s Manual (Snowblower)
3
Safety Instructions for Operation and
Maintenance Continued:
WARNING:
•
Keep all guards, shields and decals in place.
•
Keep hands, feet and clothing away from
moving components.
•
Do not wear loose or baggy clothing around
rotating machinery. Machine must be clear of
people, tools, and other objects before engaging
PTO or hydraulic valve.
•
Before working under any hydraulically
controlled implement, be certain it is securely
blocked!
•
Because of the potential safety hazard to eyes
from hydraulic leaks and/or flying debris, use of
protective eye ware is absolutely
mandatory for operator and others in the work
area.
•
Always use an approved roll bar and seatbelt for
safe operation. Overturning a loader without a
roll bar and seatbelt can result in injury or death.
•
Use the handholds and step plates when getting
on and off the loader to prevent falls. Keep
steps and platform cleared of mud and debris.
•
Operate the snowblower only from the
operator’s seat.
•
Keep your feet on the pedals, (floor plates) seat
belt fastened snuggly and seat bar lowered, (if
equipped), when operating the snowblower.
•
Never operate the snowblower in a lifted
position. Work only on the surface that the
loader is standing on.
•
Do not operate the snowblower above the rated
rpm.
DANGER:
•
Before leaving the operator’s position for any
reason or allowing anyone near the snowblower,
always exercise the following “Mandatory Shut-
down Procedure” (section 1, page 2).
Operations Safety:
Because this machine will be operated in a
potentially hazardous environment, it is absolutely
mandatory that you read and follow these safety
precautions.
WARNING:
•
Stay alert for hidden hazards or traffic. Do not
carry passengers.
•
Never operate the snowblower without good
light or visibility.
•
Engage the hydraulic valve slowly at idle speed
to prevent unnecessary stress to driveline.
•
After striking a foreign object, be sure to
exercise “Mandatory Shut-down Procedure”
(section 1, page 2). Thoroughly inspect
snowblower for any damage before restarting
and operating.
•
Should excessive vibration occur, disengage
hydraulic valve immediately. Do not continue
operation of snowblower until the problem has
been detected and corrected. Be sure to exercise
the “Mandatory Shut-down Procedure (section
1, page 2).
•
Disengage power to snowblower when
transporting or not in use.
•
When transporting the snowblower on the road
at day or night, provide adequate warning to the
operators of other vehicles.