www.lofrans.com
7
UK
4.3 Measurement menu
4.5 Settings menu
Use the (DOWN) or (UP) key to move around the parameters
OFF
Turn the unit OFF
Confirm with
Reset Measurement
Resets the chain measurement value (0.0).
Select with
= Yes = No
Confirm with
Units
Selects the unit of measurement:
Feet/ inches
Metres / centimetres
Select with
= Feet = Metres
Confirm with
Exit
To return to the settings menu.
Confirm with
Use the (DOWN) or (UP) key to move around the parameters
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Select with
Select value with
Confirm with
Back Light
This function allows the user to set the backlight on
time during which the display remains lit after the last
command given (default value 30 seconds).
Select with
Select value with
Confirm with
Light Time
By enabling this function it is possible to start the
display luminous intensity programming procedure.
Select with
Select value with
Confirm with
Keyboard Beep
This function allows the user to enable or disable the
buzzer (emitted each time a key is pressed).
Select with
= Yes = No
Confirm with
Exit
To return to the settings menu.
Confirm with
Measure
R e s e t M e a s u r e
N o
U n i t s
F e e t
O f f
E x i t
30
4.4 Alarm and functions menu
Use the (DOWN) or (UP) key to move around the parameters
Up Alarm
It is possible to enable the function and establish the
height at which the anchor-winch stops; After must
release the up button to continue to other function.
Settable values: 1.0 - 1.5 - 2.0…5.0 (metres or feet).
Select with
Select value with
Confirm with
Load Default
This function allows the User to revert to the original
factory default settings, thus erasing all settings
memorised.
This command must only be used in the event of
programming errors.
Select with
= Yes = No
Confirm with
Exit
To return to the settings menu.
Confirm with
