87
ENG
The sound alarm is repeated for 10
minutes.
It is intermittent in the first 30
seconds, after you can hear a
warning every 15 seconds. To
interrupt press the knob.
Turning the knob in clockwise
direction a new count is in function
again and you have the possibility
to modify the time.
To interrupt the function you have
to turn the knob until 0 or to press
the knob.
Cooking time function.
Turning the knob with the lighted
oven the function “cooking time” is
activated,
the led
blinks and the
remaining time is showed.
When on the display “ END”
appears, the oven switches off and a sound
warning is in function.
To come back to the hour press
the knob or put the oven knob in
off position.
Turning it to right a new count is in
function again, the oven switches
on and it is possible to program a
new time too.
To interrupt the function turn the
knob until 0 or press the knob.
To connect a “minute counter”
function during the cooking with
the lighted oven and “cooking
time” not connected, to be advised
without the switching off of the
oven, it is sufficient pressing the
knob 2 times, the “minute counter” function is
on with a pre-programmed time of 5 minutes.
It is possible to modify the time
operating on the knob.
Note: If the knob is pressed twice
consecutively it is possible to regulate the
timer at intervals of 5 minutes. Push once
more to fix the desired time.
Function “ cooking programming” with
delayed starting.
Pressing the knob with the
switched off oven, the function
“cooking programming” is on, the
blinking led
switches on, you
program the hour of automatic
lighting with the knob and you
confirm it pressing.
Turning the knob to program the cooking time,
the two leds
blink.
Press the knob to come back to the hour, the
programming has finished.
The programming led
blinks to indicate
that the function is on. After you can program
the desired function and temperature of the
oven operating on the knob.
At the programmed hour, the oven switches
on, the display starts to visualize the remaining
cooking time and the led
blinks.
At the end it switches off and “End” is visualized,
followed by sound signals.
Minute counter function.
Turn the knob to program the
times of the “minute counter”.
The display shows the remaining
time and the led
blinks, at
the end the display shows “END”
and a sound warning is in function.