63
How to program time at the first ignition of the system.
Turn the knob and program hour and minutes.
Confirm pressing completely the knob.
How to regulate the hour.
To modify the hour after the first time, keep pressed the knob for 3 seconds,
and carry out the previous operation.
Minute counter function.
Turn the knob to program the times of the “minute counter”.
The display shows the remaining time and the led
blinks, at the end the
display shows “END” and a sound warning is in function.
The sound alarm is repeated for 10 minutes.
It is intermittent in the first 30 seconds, after you can hear a warning every 15
seconds. To interrupt press the knob.
Turning the knob in clockwise direction a new count is in function again and
you have the possibility to modify the time.
To interrupt the function you have to turn the knob until 0 or to press the knob.
Cooking time function.
Turning the knob with the lighted oven the function “cooking time” is activated,
the led
blinks and the remaining time is showed.
When on the display “ END” appears, the oven switches off and a sound
warning is in function.
To come back to the hour press the knob or put the oven knob in off position.
Turning it to right a new count is in function again, the oven switches on and it
is possible to program a new time too.
To interrupt the function turn the knob until 0 or press the knob.
To connect a “minute counter” function during the cooking with the lighted
oven and “cooking time” not connected, to be advised without the switching
off of the oven, it is sufficient pressing the knob 2 times, the “minute counter”
function is on with a pre-programmed time of 5 minutes.
It is possible to modify the time operating on the knob.
