Loewe Xelos 32 Media, Руководство по эксплуатации, Страница: 84 / 148

- 84
english
Setting the pre-record and post-record time
You can set a pre-record and post-record time for timer recordings made
without auto time control (DVB) (see also page 103). This minimizes
the risk that a part of the broadcast is not recorded due to the broadcast
starting earlier and/or finishing later.
MENU: Call
TV menu
.
Choose Recording ,
switch to the menu line below.
Set pre-record or post-record time ,
switch to the menu line below.
Enter the time using the numeric buttons (always 2-digit:
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time). Factory setting: pre-record:
00 min ,
post-record: 05 min .
DR+ Streaming settings
Setting yes enables you, via the archive, to also view
recordings from other TV sets that have accessible films
within the home network (client function).
Give a name for your TV set group.
Using different group names enables you to group your
TV sets as required. Only TV sets under the same group
name can exchange data.
IP port numbers are preset ex-factory. Under normal
circumstances they do not require amending.
Post-record time Recording wizard list
PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded
in full.
TV MENU
Recording
Pre-record time
00 min (0 - 15)
Digital Recorder
Using the DR
archives of
other TVs
DR device
group name
IP port
number
DR+ STREAMING SETTINGS
Using the DR archives of other TVs yes
DR device group name Home
IP port number 17123
no